http://www.robocommunity.com?src=forumtopic_rss RoboCommunity - WowWee Robotics Forum Mon, 06 Oct 2008 22:15:44 GMT admin@robocommunity.com RoboCommunity 60 http://www.robocommunity.com/brand/robo/community.gif http://www.robocommunity.com?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14188/My-Rovio-is-now-online-Thanks-to-Jason-at-Wowwee/?src=forumtopic_rss Well, after another phone call to Frontier my provider today they said that we dont support port forwarding, thats our official statement. However Jason at customer service at Wowwee did not give up! He and an engineer found a fix! Adding additional ports beyond the TCP did the trick. I have to say they have the best support of any place I have ever dealt with. They didnt get impatient, they didnt get discouraged, they plowed through until they found an answer, now I can connect from any computer in the world, finally! They rock and so does Rovio! What a great customer experience! Rovio Mon, 06 Oct 2008 22:15:39 GMT crmfghtr http://www.robocommunity.com/forum/thread/14188/My-Rovio-is-now-online-Thanks-to-Jason-at-Wowwee/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14187/UK-Rovio-buyers-getting-ripped-off/?src=forumtopic_rss Hi all, I was recently going to buy myself a Rovio for robot development reasons. I went (online) shopping, checking all the usual sources of Wowee robots and after 30 mins of searching I was shocked to find that Red5 had snapped up exclusivity to sell Rovio in the UK. Not only that but I went in expecting to pay about £160 (ex P&P) to find that the price has skyrocketed to over £250, I'm not paying that much for a robot that I am going to use for working on research into Artificial inteligance and Vision recognition where you get little money to spend on the robot because of the price of the computer needed to run the whole backend. /ramble As you cen tell, I hate exclusivies of products to retailers I have never heard of that will jack up the price. I hope Red5 drops exclusivity before the holiday season because I need something to present by then. -RichardR Rovio Mon, 06 Oct 2008 19:30:53 GMT RichardR http://www.robocommunity.com/forum/thread/14187/UK-Rovio-buyers-getting-ripped-off/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14184/CAN-I-HACK-RQ-S-IR-SCANNER/?src=forumtopic_rss HI!COULD ANYONE TELL ME IF I COULD HACK RQ'S SCANNER??? Roboquad Mon, 06 Oct 2008 16:26:16 GMT iquad http://www.robocommunity.com/forum/thread/14184/CAN-I-HACK-RQ-S-IR-SCANNER/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14182/WowWee-Rovio-Review-Just-Posted/?src=forumtopic_rss Hey everybody! I'm happy to announce that our first review and unboxing of Rovio has been posted on the community! Rovio Review & Unboxing Go check it out and let the community know what you think of Rovio. When you receive yours, we'd love for you to share your experiences as an article or on the forums. Enjoy! Rovio Mon, 06 Oct 2008 15:25:49 GMT Peter Redmer http://www.robocommunity.com/forum/thread/14182/WowWee-Rovio-Review-Just-Posted/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14180/myrovio.com-dns-hosting/?src=forumtopic_rss From what I can see this hasn't been setup on the myrovio website but... I think it would be a great idea for wowwee to allow free dns hosting (or at a minor cost to the user) through their myrovio.com website... now their site is live, why not allow people to signup for an account i.e username.myrovio.com to access their rovio. I know there are free dns hosting options elsewhere (I've set one up already for my rovio)but how much nicer would it be to have one with myrovio on it! This is used just as an example in the rovio manual also. Thoughts? Cheers Rovio Mon, 06 Oct 2008 02:46:05 GMT dj_siek http://www.robocommunity.com/forum/thread/14180/myrovio.com-dns-hosting/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14178/Rovio-uses-eCos-WowWee-owes-us-some-open-source-code/?src=forumtopic_rss Background: The main program in the Rovio is called CameraTest.bin. It is part of the firmware inside the robot (see other threads if you are interested in the technical tidbits). This program handles the web server, WiFi configuration, camera control, glue to other systems (like motors and NorthStar), other CGI server scripts, and much more. It uses an open source embedded OS called "eCos" http://ecos.sourceware.org/ This represents approximately 1MB of ARM code and data. Part of that is 'eCos'. eCos is released under a GPL-like license (but not as strict) http://www.gnu.org/licenses/ecos-license.html http://ecos.sourceware.org/license-overview.html "....In the simplest terms, when you distribute anything containing eCos code, you must make the source code to eCos available under the terms of the GPL." "...However you would not need to make available any other code, such as the code of a wholly separate application linked with eCos." So WowWee owes us the source code for at least part of the software. ------- Request for action: This is the official WowWee endorsed forum isn't it? If so, would someone with contacts at WowWee please inform them they are currently in violation of the eCos licensing terms, and ask them nicely to provide the required source code ??... Rovio Mon, 06 Oct 2008 01:00:41 GMT RobosapienPet http://www.robocommunity.com/forum/thread/14178/Rovio-uses-eCos-WowWee-owes-us-some-open-source-code/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14177/router-configuration/?src=forumtopic_rss When configuring for remote control, is it necessary to connect the rovio directly to a router with rj45 cable for initial configuration to the router? or does rovio find the wireless network without a hardwire connection? Rovio Sun, 05 Oct 2008 22:49:21 GMT don http://www.robocommunity.com/forum/thread/14177/router-configuration/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14176/Where-can-I-buy-Rovio/?src=forumtopic_rss Something is wrong with the web site, it does not show anyplace to buy Rovio. Anyone know the web sites of the stores selling Rovio? Thanx, Ebster Rovio Sun, 05 Oct 2008 19:48:50 GMT ebster5150 http://www.robocommunity.com/forum/thread/14176/Where-can-I-buy-Rovio/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14175/The-Roboquad-Experience/?src=forumtopic_rss Hey I love my Roboquad and I was wondering whoever else owns one, how do you like him? Oh and please share all your stories and experiences with the little interactive friend! Roboquad Sun, 05 Oct 2008 16:13:29 GMT Robo, BG http://www.robocommunity.com/forum/thread/14175/The-Roboquad-Experience/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14174/Mr.-Persoanlity/?src=forumtopic_rss I'm not planning on buying him but I would like to ask if anyone is and why do you like him? Mr Personality Sun, 05 Oct 2008 16:11:06 GMT Robo, BG http://www.robocommunity.com/forum/thread/14174/Mr.-Persoanlity/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14173/2009-Robots/?src=forumtopic_rss This may be a little early, but considering the years close to almost being over, does anyone know or have ideas of the 2009 product line in robots? I think they should reintroduce P-bot or a better, cheaper version. WowWee Robotics Sun, 05 Oct 2008 03:08:06 GMT AnamaTroy http://www.robocommunity.com/forum/thread/14173/2009-Robots/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14172/Mista-Personality/?src=forumtopic_rss Okay, im not insulting the guy in any way, because if I do odds are wowwee will create a personalaty agenst me! (Just Kidding) But what else does it do, the tribot had games and pretty much the rest of the robots strong points were tricks and such, alot of the newer bots have more, (Wrex control panel)(femsapien ummm, how to put it....... Interaction) okay thanks... Mr Personality Sun, 05 Oct 2008 01:42:06 GMT Flippa683 http://www.robocommunity.com/forum/thread/14172/Mista-Personality/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14169/Rovio-warning-to-Frontier-customers-and-Gigaset-SE567-modem-owners/?src=forumtopic_rss Well after easily 10 hours of phone calls, online help, multiple attempts, I have discovered the issue with my Rovio not working on an external network(internet access). I googled this modem and came up with multiple pages of people not able to get it to port forward, the manufacturer says its not there fault and Frontier told a customer hardly nobody uses port forwarding. Here is what I found(this is not a fault in Rovio but in this now commonly used modem the Gigaset SE567) http://www.dslreports.com/forum/r20669183-A-solution-for-Gigaset-SE567-on-por... http://www.dslreports.com/forum/r20761020-Sad-News-For-Frontiernet-Customers http://forum.portforward.com/YaBB.cgi?num=1222298156/6 Went through the same run around with my provider today, and unfortunately you cannot use anything but there modem unless you want to try and bridge it with something else which just opens up another can of worms that I see by these forums has not worked. The only possible fix for this would be for Wowwee to and the providers to get together and create a specific service for this modem since apparently it does work with some services.(you can select them from a dropdown menu in the port forwarding wizard) If this changes I will immediately update, Robert Roschler has been very helpful in trying to find a fix but... Rovio Sat, 04 Oct 2008 18:59:45 GMT crmfghtr http://www.robocommunity.com/forum/thread/14169/Rovio-warning-to-Frontier-customers-and-Gigaset-SE567-modem-owners/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14168/Rovio-technical-USB-and-firmware/?src=forumtopic_rss (potential starting places if someone wants to hack this device) Using the Rovio USB connection, there are two USB devices, that are mutually exclusive (both vendor ID 0x0416) Product ID 0x7021 - A serial connection (identifies as a virtual COM port). I don't know if this is used, but it could be a useful debug com port. Product ID 0x7020 - a 2MB disk, using a non standard file system (ie. RAW). More details below. I haven't figured the details which device is selected. It may depend on the order it is connected (turn on Rovio, wait for light on, plug in cable - or plug in cable first ???) ----- The 2MB disk appears to be mostly-direct image of the flash ROM in the Rovio. The first 1MB appears to be valid. The second 1MB appears to be blank (0xFF, or it may not exist) The way I capture it (raw disk copy using MacOSX) gives a 16byte header. After the header, the next part (830KB currently) is *exactly* the same as the firmware update .bin (see below) After that, there are a few additional spaces used, but it is mostly blank (0xFF) Starting at 0xFD800 are the user... Rovio Sat, 04 Oct 2008 17:50:49 GMT RobosapienPet http://www.robocommunity.com/forum/thread/14168/Rovio-technical-USB-and-firmware/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14166/Audio-with-Mac/?src=forumtopic_rss Are there plans to implement two-way audio with the Mac platform? I would buy several of these now if it had audio using Safari (or even a separate app) on the Mac. Rovio Sat, 04 Oct 2008 14:07:29 GMT tome http://www.robocommunity.com/forum/thread/14166/Audio-with-Mac/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14159/Documentation-wiki/?src=forumtopic_rss Okay, I set up a wiki to document my Rovio findings . If anyone else wants to play, well, help yourself :) --snipped from my (current) front page For some time I (Rudolph) have been meaning to consolidate my notes, projects, and other robotic stuff into one place. Now, with the release of the Rovio I knew there would also be a lot more code snippets and commands to keep track of. Then it finally hit me; Why not set up a Wiki? Not only can I keep my own notes this way, but maybe others can maybe find some use from them as well. And if anyone else has any new/different information to share they can join in too. It will eventually contain some other stuff too, like Arduino. Rovio Fri, 03 Oct 2008 19:23:14 GMT Rudolph http://www.robocommunity.com/forum/thread/14159/Documentation-wiki/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14158/Rovio-WebServer-URLs-JavaScript-and-tech-stuff/?src=forumtopic_rss Rovio acts like a web server. Your computer's browser connects to that web server and the Rovio provides web pages for the user interface (with changing content, like the current camera image) The default main webpage provides the full screen user interface using JavaScript " http://{IP_ADDRESS}/index.htm " (replace {IP_ADDRESS} with your Rovio's IP address, eg: 10.x.y.z or 192.168.x.y typically) For mobile devices, iPhone/iPod/WinCE, it automatically redirects to " http://{IP_ADDRESS}/mobile/index.htm " This is a stripped down version for smaller screens The webpage is selfcontained on the web server (Rovio), including all images (eg: " http://{IP_ADDRESS}/img/titlebar/titlebar_left.gif ") NOTE: The current camera image can be accessed directly by: http://{IP_ADDRESS}/Jpeg/CamImg.jpg ---- The rovio.js JavaScript explains how much of the glue works http://{IP_ADDRESS}/lib/rovio.js (edit with any text editor) It uses something called "Prototype and Scriptaculous", a combination of useful JavaScript libraries http://www.stevekallestad.com/blog/prototype_and_scriptaculous_compressed.html ("combined prototype and scriptaculous" version) Most of the functionality is performed in .CGI scripts (see rovio.js), some with URL args (eg: "&blah=1") or http request POSTed args. Camera features: " http://{IP_ADDRESS}/Cmd.cgi + POSTED_ARGS" is the main one, which can call other .CGI functions Functionality is VERY similar to this camera: http://www.canvision.net/product/product_pt300_eng.html http://www.canvision.net/support/pt300-cgi/CmdList.htm (some don't apply) There are others, "GetData.cgi" for getting camera data,... Rovio Fri, 03 Oct 2008 18:40:32 GMT RobosapienPet http://www.robocommunity.com/forum/thread/14158/Rovio-WebServer-URLs-JavaScript-and-tech-stuff/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14156/RS-Media-problem-and-Robosapien-Female/?src=forumtopic_rss Just 1 question about the RS media. How do i browse the mp3 or the mp4 that i've placed onto my 1gb sd card and let the RS media play it? Do i need to create some sort of folder or something and place all the mp3 inside there because i can't find anything when i tried browsing the file from the RS media The 2nd issue relates to the femalesapien. They don't have the BIGGER version of that one? Because all i see for now is the mini version which is rather pathetic -_-. I wanted one that's the same size as RS Media and Robosapien V2 RS Media Fri, 03 Oct 2008 13:29:18 GMT Stalvros http://www.robocommunity.com/forum/thread/14156/RS-Media-problem-and-Robosapien-Female/#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14153/Rovio-arrives/?src=forumtopic_rss Got my Rovio today yay! Works great easy setup, however I am sorry to say no luck with Samsung Instinct phone, very dissapointed. I am afraid that your choices of using your phone with it are going to be extremely limited,(as I suspected a long time ago and posted) if anyone ever gets a phone working with it, let us know! Rovio Thu, 02 Oct 2008 20:44:43 GMT crmfghtr http://www.robocommunity.com/forum/thread/14153/Rovio-arrives/?page=2#discussion?src=forumtopic_rss http://www.robocommunity.com/forum/thread/14148/where-did-the-robosapien-originate/?src=forumtopic_rss hi!do you know where rsv1 originate? moderator tweak - changed specfied forum area from General Robotics to Robosapien V1. Robosapien V1 Thu, 02 Oct 2008 03:31:03 GMT iquad http://www.robocommunity.com/forum/thread/14148/where-did-the-robosapien-originate/#discussion?src=forumtopic_rss