Can you post a quick pic? The only thing I can think of is that the hole at the trailing edge of the wing didn't catch on the little pin, but that'd be pretty obvious!
Visit my Roving RoboReporter blog!
After a few days flying my new dragonfly, I finally broke one of the wing rods and had to install the back-up pair. After doing so, however, I've got some major issues getting the dragonfly to fly properly. It now wants to nose-dive immediately. Actually, if you just hold the dragonfly and start flapping its wings it tries to turn down, under your hand. It's like the "lift" has been reversed.I tried swapping the wings left and right but had the same result. The checked that the rods are securely seated in their holes as suggested in other threads here on the forum.
I'm sure it's a user error, but I'm not quite sure what else to try at this point. Any suggests would be much appreciated. I miss flying him - I was just starting to really get the hang of it!
cheers,
David
Can you post a quick pic? The only thing I can think of is that the hole at the trailing edge of the wing didn't catch on the little pin, but that'd be pretty obvious!
Visit my Roving RoboReporter blog!