since you have both set eaten up by the cats, don't throw them away yet. Try this and experiment with the foam sheets that they use for hobbie crafts. the sheets that I'm talking about are the very dense but yet flexable foam sheets that kids use to make visors out of and other soft felxible things like what they put into scrap books as well. Wal-Mart, Target, or a craft store will have them in their hobbie section. Cut out the shape of the blades and attach the locking platic hook to it. check it out first before adding the aluminum tape to the edges. I you don't know what I'm talking about let me know and I'll find a picture of them and let you know where to get it or better yet, I may try this myself then show you how to do it.

GWJax, To Hack and make mods on robots is a life style and comes natural and not by choice. If a robot has a screw to open it then it must be opened!

Robostuff Let us know how those new foam wings work and if you can get a pic of it. Thanks

GWJax, To Hack and make mods on robots is a life style and comes natural and not by choice. If a robot has a screw to open it then it must be opened!

you can get a somewhat curvature by wrapping the foam aroung a 6" tube of PVC pipe and hit it with a heat gun this should give you a bit of a curve to the blades but not like the originals though.

GWJax, To Hack and make mods on robots is a life style and comes natural and not by choice. If a robot has a screw to open it then it must be opened!