Previous Thread
the Maplin website says that the 7.5v output for this adapter is 3600MA but the RS manual says it wants 3100MA at 7.5v - is it OK to use or will this diference damage it?
Went to Maplins today and picked up a PSU for the RSM. Its got UK-US Euro and Aussie plug adaptors and runs at the correct Amps for the RSM.
Here is the link
http://www.maplin.co.uk/Home.aspx?C=G...The Maplins order code is L48BQ type this into the search box
December 30, 2006 6:40 AM
December 30, 2006 6:50 AM
Hi robsmith, according to the chap at Maplins it will be fine. I took the user manual with me and he advised me from that. I have been using it without any problems, but maybe someone on here with a little more knowledge could explain in more depth what the .4 amps difference would effect if anything.
regards
December 30, 2006 12:04 PM
I Was at maplins today but they had sold out of that adaptor :(. Only one they had that would do was a 5000ma one that cost £30 odd but thats too expensive i think. The £12.99 one will be fine, all the 3600ma means is it can take a load of upto 3600ma.
December 30, 2006 1:26 PM
if you get a multi adapter you can set it yourself.....you can get them from pc world currys comet and argos do them. cost is around £10-£15.
Add Your Reply
Sponsored Links
Copyright © 2008
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
Drobo Space |
DVR playground |
MediaSmart Home |
Monster Community |
MotoDash |
My DigitalEntertainer |
My Open Router |
Presto Place |
Robo Community |
Sansa Community |
Sling Community |
TechLore |
TiVo Community |
TouchSmart Community
Product names, designations and logos are trademarks or registered trademarks of WowWee Group Limited and all copyright in the associated images is the property of WowWee Group Limited. RoboCommunity.com is not affiliated with WowWee Group Limited.
