Latest Rovio Beta firmware release, 19 JAN 2009.

Unzip and install to Rovio as instructed on the WowWee Support site.

Changelog:
---------------------------------------------------------------

v5.00b9 to v5.00b10 Updates:

---------------------------------------------------------------

1. Increased USB buffer size to 16k. Fix to Wi-Fi APs occasionally not showing in setup.

---------------------------------------------------------------

v5.00b8 to v5.00b9 Updates:

---------------------------------------------------------------

1. Fixed issue with active-x when using different local web ports.
2. Fixed issue with verify internet access checkbox not updating.
3. Updated Wi-Fi ranges.
4. Added note after firmware update instructing the user they may need to re-setup their Rovio.
5. Added note after network changes instructing the user to make sure they are on the same network and recheck the network settings using the wizard.
6. Adjusted position of Quicktime note.
7. Corrected battery status on the dock.
8. Changed timing of MCU locks to try and prevent deadlocking.
9. Upgraded to TrueTrack v5.13 with docking recovery routine.
---------------------------------------------------------------

v5.00b7 to v5.00b8 Updates:

---------------------------------------------------------------

1. Updated help files.
2. Fixed bug when logging in as guest user.

---------------------------------------------------------------

v5.00b6 to v5.00b7 Updates:

---------------------------------------------------------------

1. Help updated.
2. Increased sound buffer and added NACK when buffer is full.
3. Sets network mode automatically from the network selected.
4. Replaced special characters with ASCII for network password.
5. UPnP by enabled default.
6. Memory pool enlarged for network scan.
7. Removed strange values for 'Group' in GetWlan.cgi.

---------------------------------------------------------------

v5.00b5 to v5.00b6 Updates:

---------------------------------------------------------------

1. Fixed popup bug.
2. Updated and reskinned help files.

---------------------------------------------------------------

v5.00b4 to v5.00b5 Updates:

---------------------------------------------------------------

1. Added Online status.
2. Added verification of internet access.
3. Added a check for new firmware.
4. Added a box to select the network.
5. Added Quicktime support (Safari only). Still defaults to M-JPEG as Quicktime won't work on some routers over the internet.
6. Fills password fields with fake password.
7. Added network confirm key field.
8. Added video player selection box for MJPEG & Quicktime (Safari only).
9. Adjusted video box size to fit better.
10. Added HTTP server side request.
11. Added a hardware restore to factory settings function:
To manually restore Rovio to its factory default settings using the hardware reset function:
- Make sure Rovio is off and disconnected from your computer.
- Turn Rovio on, and then wait for the LED power indicator on Rovio's neck to light up, and then turn it off. Repeat this step two more times.
- Turn Rovio on and leave it on. Rovio's LED power indicator cycles red, orange and then green a few times. Once the LED power indicator stops changing colors, Rovio will be restored to its default factory settings with the latest firmware you installed; any previously saved settings will be lost.

---------------------

v5.00b.2 to v5.00b.3 Updates:
---------------------------------------------------------------
1. Restoring over default settings issue resolved.
2. Corrected LED colours: Nothing = Booting; Orange = Connecting/Can't connect; Green = Connected to network and ready; Red = user is connected.

v5.00b.1 to v5.00b.2 Updates:
---------------------------------------------------------------
1. Added DropData.cgi which stops mjpeg video streams by ID.
2. Added call to DropData.cgi on page unload which stops browser continuously streaming even though the tab has been closed.
3. Added a call to re-establish connection after the video settings are changed. Fixes FF3.0 issues.
4. Fixed bug with network password field not saving.

v5.00b to v5.00b.1 Updates:
---------------------------------------------------------------
1. Bug fixed in Wi-Fi driver that caused the main thread to be blocked.
2. Quicktime support in firmware fixed but has not been implemented in the UI.

UI v4.09b to v4.09b.1 Updates:
---------------------------------------------------------------
1. Fixed Safari layout issues with side panels.
2. Fixed forced MJPEG for active-x on all ports (assessible using index.htm?force_mpeg=1).
3. Fixed bug with update button not enabling when the port field is changed.
4. Changed input boxes to enable update button on keypress not onchange event.
5. Uses new active-x v1.0.0.6 which fixes the PC Mic not sending audio on ports other than 80.
6. Hovering over nav bar now shows nav strength not wifi strength.
7. Added update log (updates.txt).